This DAB Bronze VS 65/150 Class F Hot Water Circulating Pump is for hot for water circulation in pressurised closed circuit, or open circulation type, domestic heating and air conditioning systems.

- Single body consisting of the cast iron hydraulic section and the wet rotor motor.
- Die-cast aluminium motor casing.
- Technopolymer impeller.
- Tempered stainless steel motor shaft on graphite bushings lubricated by the pumped liquid.
- Stainless steel rotor liner, stator liner and closing flange.
- Ceramic thrust ring, silicon seal rings, and brass air breather plug.
- The wet rotor asynchronous two-pole motor is protected as far as resistance
- Does not require overload protection.
- Three-speed operation.
- Protection class: IP 44, Insulation class: F, Cable gland: PG 11, Installation: with horizontal motor axis.
- Standard voltage: single-phase 230 V / 50 Hz

DAB Bronze VS 65/150 Class F Hot Water Circulating Pump 60185007H Specification :

- Manufacturer Product Number : 60185007H
- Model No : VS 65/150
- Operating range: from 0,6 a 3,7 m3 /h with head of up to 6 metres.
- Pumped liquid temperature range: from -10 °C to +85 °C for sanitary uses, and +110 °C for other uses. To avoid the formation of calcium, do not exceed 65 °C, and include a calcium removal system when the hardness of the water exceeds 15 French degrees.
- Pumped liquid: clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 30%).
- Maximum operating pressure: 10 bar (1000 kPa).
- Minimum suction pressure: the values are shown in the corresponding tables.
- Installation: with HORIZONTAL MOTOR AXIS.
- Special executions on requests: alternative voltages and frequencies.
- Weight : 2.600000
- Manufacturers Warranty : 1 Year (Subject to Manufacturers T&C's)